Since 1994 · Wenzhou plant · Built to API 608 / ASME B16.34 · Europe office in Budapestsales@bautu.comWhatsApp +36 30 713 3633
Home / Butterfly Valves / PTFE Lined
PTFE lined wafer butterfly valve, WCB body, worm gear operated, DN200

Butterfly valve · Supplied by BAUTU

PTFE Lined Butterfly Valve — Wafer Type, PN10/16

D71F46 · D71F4 · D71F/P · fully or half lined

Centre-line wafer butterfly valve with a fluoroplastic lining for acids, alkalis and other corrosive media. In the fully lined versions, FEP (F46) or PTFE (F4) covers the body bore and the disc, so the media touches no metal. Supplied by BAUTU; we fit pneumatic or electric actuators in our Wenzhou plant.

SizeDN40–DN1000 (PN16)
PressurePN6 / PN10 / PN16
LiningFEP (F46) · PTFE (F4)
BodyWCB
OperationLever · Gear · Pneumatic · Electric
DesignGB/T 12238
  • Fully lined: body bore and disc covered in fluoroplastic
  • Face-to-face to GB/T 12221 short series; flanges to HG/T 20592 or your contract
  • Pressure tested to GB/T 13927 before shipment

An engineer replies within 24 hours. Send size, pressure, body material, actuator type and quantity.

Specifications

Technical Data

DesignCentre-line (concentric) wafer type, fully or half lined
Size rangeDN40–DN1200 (PN10); DN40–DN1000 (PN16)
Nominal pressurePN6 / PN10 / PN16 (0.6–1.6 MPa)
LiningFEP (F46) or PTFE (F4)
D71F46Body and disc fully lined; disc and stem one piece
D71F4Body fully lined; lined disc on the stem
D71F/PLined body with stainless steel disc (half lined)
BodyWCB
Temperature−29 °C to +120 °C with FEP (F46); PTFE (F4) lining for higher temperatures on request
Design standardGB/T 12238
Face-to-faceGB/T 12221, short series
Flange connectionHG/T 20592, or as your contract requires
Pressure testGB/T 13927
Marking · supplyGB/T 12220 · GB/T 12252
OperationLever up to DN150 (PN10) / DN125 (PN16); worm gear above; pneumatic or electric actuator
MediaAcids, alkalis, salt solutions, chlorine water, plating and pickling liquids

Application

Where It Is Used

For corrosive media in chemical, plating, pickling and water-treatment plants, where a stainless steel valve would corrode.

  • Chemical plants: acids, alkalis, solvents
  • Electroplating and pickling lines
  • Water-treatment dosing: chlorine, ferric chloride, caustic soda
  • Fertiliser and chlor-alkali plants
Close-up of PTFE lining on body and disc of a lined butterfly valve

Dimensions

Dimensions (mm)

L · face-to-face · H · height (reference) · D1 · flange bolt circle · Z-Φd · number × diameter of bolt holes

D71F46 / D71F4 wafer, reference dimensions (mm)

DNNPSLH PN10/16D1 PN10Z-Φd PN10D1 PN16Z-Φd PN16Weight PN16 (kg)
401½43140/1451104-181104-184
50243145/1501254-181254-185
652½46155/1601454-181454-187
80346165/1701604/8-181608-1810
100452180/1851808-181808-1814
125556203/2102108-182108-1822
150656225/2302408-232408-2332
200860275/2852958-2329512-2366
2501068315/32535012-2335512-2580
3001278348/36040012-2341012-2594
3501478415/43046016-2347016-25125
40016102460/47551516-2552516-30150
45018114500/52556520-2558520-30172
50020127530/56562020-2565020-34225
60024154610/62072520-3077020-41290
70028165675/68684020-3084024-41330
80032190805/81595024-3495024-41425
90036203995/1010105028-34105028-41495
1000402161170/1185116028-34117028-48710
1200482541295/–138032-41–––

D1 and Z-Φd are the bolt circle and bolt holes of the HG/T 20592 mating flange. H and weight are reference values. DN1200 is PN10 only.

Options

Operators · Actuators · Accessories

  • Hand lever with notch plate (up to DN150 PN10 / DN125 PN16)
  • Worm gearbox with handwheel for larger sizes
  • Pneumatic actuator, double- or single-acting (BAUTU AT series)
  • Electric actuator, on-off or 4–20 mA modulating, explosion-proof option
  • Solenoid valve, limit switch box, positioner
  • Lining: FEP or PTFE; half lined with stainless steel disc for milder media

Actuators are fitted and set in our Wenzhou plant before shipment.

Send us these 7 details for a fast quote

  1. Valve size (DN) and flange standard
  2. Pressure: PN6, PN10 or PN16
  3. Media, concentration and temperature
  4. Lining: FEP, PTFE, or half lined
  5. Operation: lever, gear, pneumatic or electric
  6. Actuator: air pressure or voltage, on-off or modulating
  7. Quantity and destination

How we supply it

Supplied and Automated by BAUTU

This butterfly valve is made by a partner factory that specialises in butterfly valves, and supplied by BAUTU. When you order it with an actuator, we fit and set the actuator in our Wenzhou plant.

  • Valve made and pressure tested by our partner factory
  • Certificate of quality with every valve
  • Actuators fitted and set in our Wenzhou plant
  • Photos of your order before shipment

FAQ

Frequently Asked Questions

FEP (F46) or PTFE (F4) lining: which should I choose?

FEP is moulded into a dense, even lining and suits most acids and alkalis from −29 °C to +120 °C. PTFE (F4) takes more heat. Tell us the media, concentration and temperature and we recommend one.

What is the difference between fully lined and half lined?

In a fully lined valve (D71F46, D71F4) the body bore and the disc are both lined, so the media touches only fluoroplastic. A half-lined valve (D71F/P) has a lined body and a stainless steel disc; it costs less and suits milder media.

Is this butterfly valve made in your own plant?

No. It is made by a partner factory that specialises in lined butterfly valves and supplied by BAUTU. When you order it with an actuator, we fit and set the actuator in our Wenzhou plant.

Which flanges does it fit?

The face-to-face follows GB/T 12221 short series and the bolt pattern fits HG/T 20592 PN10/16 flanges. For other flange standards, send us yours and we confirm the fit.

Can you automate this valve?

Yes. We fit pneumatic or electric actuators and set them before shipment. We can also fit actuators to lined butterfly valves you bought elsewhere: send the valve model and top-flange size.

What is the lead time?

Standard sizes ship in 15–20 days. Large sizes are quoted per order.