Since 1994 · Wenzhou plant · Built to API 608 / ASME B16.34 · Europe office in Budapestsales@bautu.comWhatsApp +36 30 713 3633
Home / Ball Valves / Q47F Trunnion Mounted Ball Valve

Trunnion ball valve · American & Chinese standard · Made in Wenzhou

Q47F Trunnion Mounted Ball Valve — Class 150 / 300 / 600, PN16 to PN64

MODEL Q47F • API 608 / ASME B16.34 • ASME B16.5 FLANGES

Flanged ball valve with the ball held on upper and lower trunnions, so operating torque stays low on large bores and higher pressure classes. Full bore, bolted body, PTFE or RPTFE seats, worm gear operated, in WCB, CF8 or CF3M.

SIZENPS 2″–24″
RATINGClass 150 / 300 / 600
BODYWCB · CF8 · CF3M
SEATPTFE · RPTFE
FIRE-SAFEAPI 607 · TÜV SÜD
OPERATIONWorm gear
  • API 607 fire-tested design, certificates issued by TÜV SÜD (Oct 2026)
  • Every valve shell and seat tested per API 598, test report in every shipment
  • Lead time 50–60 days, confirmed with your quote

An engineer replies within 24 hours. Send size, class, material and quantity. See API 607 certificates →

Specifications

Technical Data

Design standardAPI 608 / ASME B16.34; GB/T 12237
Face-to-faceASME B16.10; GB/T 12221
FlangesASME B16.5 raised face; JB/T 79 for PN versions
Butt-weld endsASME B16.25, on request
Size rangeNPS 2″–24″ (DN50–DN600)
Pressure classClass 150 / 300 / 600; PN16 / 25 / 40 / 64
Body materialASTM A216 WCB, A351 CF8, A351 CF3M (316L)
SeatPTFE (standard) · RPTFE (option)
Temperature−29 °C to +150 °C (PTFE) · up to +180 °C (RPTFE)
ConstructionTrunnion-mounted ball, full bore, bolted body
OperationWorm gear; ISO 5211 top flange for actuators
TestingAPI 598 — every valve
Fire testAPI 607 (8th Ed.), TÜV SÜD certified – see certificates

Design

Why a Trunnion Ball Valve

  • Ball fixed on upper and lower trunnions: line pressure is carried by the trunnions, not pushed into the downstream seat
  • Lower, steadier operating torque than a floating ball valve of the same size, so a smaller gearbox or actuator
  • Full bore for low pressure drop
  • Anti-blowout stem and anti-static device
  • Fire-safe design tested to API 607
  • ISO 5211 top flange: worm gear as standard, pneumatic or electric actuator on request

Materials

Parts & Materials

Standard material combinations. Model code suffix: C = WCB, P = CF8, RL = CF3M (316L).

PartWCB (C)CF8 (P)CF3M (RL)
Body / BonnetWCBCF8CF3M
BallASTM 420 (2Cr13)A182 F304A182 F316L
StemASTM 420304316L
SeatPTFE / RPTFEPTFE / RPTFEPTFE / RPTFE
Seat ring420304316L
Stem packingPTFEPTFEPTFE
Body gasketPTFEPTFEPTFE
Bolts / NutsA193 B7 / A194 2HA320 B8 / A194 8A320 B8 / A194 8

Dimensions

Dimensions (mm)

Class 150

NPSDNLDD1D2fbn-ØdHW
4″DN100229230190.5157.2224.38-Ø19330300
5″DN125356255215.9185.7224.38-Ø22360300
6″DN150394280241.3215.9225.98-Ø22392300
8″DN200457345298.5269.92298-Ø22492300
10″DN250533405362323.8230.612-Ø25548300
12″DN300610485431.8381232.212-Ø25688400
14″DN350686535476.3412.8235.412-Ø29722400
16″DN400762595539.8469.923716-Ø29722400
18″DN450864635577.9533.4240.116-Ø32804500
20″DN500914700635584.2243.320-Ø32952600
24″DN6001067815749.3692.2248.120-Ø351154750

Class 300

NPSDNLDD1D2fbn-ØdHW
4″DN100305255200157.2232.28-Ø22340300
5″DN125381280235185.7235.48-Ø22370300
6″DN150403320269.9215.923712-Ø22402300
8″DN200502380330.2269.9241.712-Ø25498300
10″DN250568445387.4323.8248.116-Ø29655400
12″DN300648520450.8381251.316-Ø32658400
14″DN350762585514.4412.8254.520-Ø32686400
16″DN400838650571.5469.9257.620-Ø35880600
18″DN450914710628.6533.4260.824-Ø351050750
20″DN500991775685.8584.226424-Ø351110750
24″DN6001143915812.8692.2270.324-Ø411400750

Class 600

NPSDNLDD1D2fbn-ØdHW
2″DN5029216512792.1727.48-Ø19240300
2½″DN65330190149.2104.8730.68-Ø22290300
3″DN80356210168.3127733.88-Ø22340300
4″DN100432275215.9157.2740.18-Ø25358300
5″DN125508330266.7185.7746.58-Ø29400300
6″DN150559355292.1215.9749.712-Ø29445400
8″DN200660420349.2269.9757.612-Ø32498400
10″DN250787510431.8323.8765.516-Ø35653400
12″DN300838560489381768.720-Ø35665500
14″DN350889605527412.8771.920-Ø38738600
16″DN400991685603.2469.9778.220-Ø41920750

L = face-to-face per ASME B16.10; D, D1, D2, b, n-Ød = flange per ASME B16.5; H = height to the handwheel centre; W = handwheel diameter. PN16–PN64 versions are made to JB/T 79 flanges and GB/T 12221 face-to-face; dimensions on request.

Q47F trunnion ball valve dimension drawing showing L, D, D1, D2, b, f, H and WDIMENSION DRAWING

Need a GA drawing for your size?

Send the size, class and end connection. Our engineering team returns a general arrangement drawing with your quote, including actuator mounting if you need one.

Pressure rating

Working & Test Pressures (MPa)

RatingMax. working at 38 °CShell testHigh-pressure seat testLow-pressure air seat test
Class 1502.03.02.20.6
Class 3005.17.75.60.6
Class 60010.215.311.20.6
PN161.62.41.760.6
PN252.53.82.750.6
PN404.06.04.40.6
PN646.49.67.040.6

Class ratings shown for WCB body. Shell test 1.5× and seat test 1.1× the rated pressure, per API 598 / GB/T 13927. Working pressure is also limited by the seat: PTFE to +150 °C, RPTFE to +180 °C.

How to order

Model Code Q47F-150LBC

QBall valve
4Flanged ends
7Trunnion-mounted ball
FPTFE seat
-150LBClass 150 (or 300LB / 600LB, PN16–PN64)
CWCB body (P = CF8, RL = CF3M)

Chinese-standard versions use the PN number instead of the class, e.g. Q47F-16P = PN16, CF8 body.

Send us these 8 details for a fast quote

  1. Size (NPS or DN)
  2. Pressure class or PN
  3. Body material: WCB, CF8 or CF3M
  4. Seat: PTFE or RPTFE
  5. End connection: RF flange or butt-weld
  6. Operation: worm gear, pneumatic or electric
  7. Medium and working temperature
  8. Quantity and destination

Made in one plant

From Machining to Crate in Wenzhou

Machining a stainless steel ball valve body01 MACHINING
Drilling the flange bolt holes of a ball valve body02 DRILLING
Tightening body bolts during ball valve assembly03 ASSEMBLY
Ball valve clamped in the API 598 hydraulic test press04 API 598 TEST

See the valve before you order

Real footage of the valve from our plant. Want to see your own order? Book a live video call and we show your valves on the test bench.

Book a Video Tour
Export crates ready to ship in front of the BAUTU plant in WenzhouCRATED AT OUR PLANT

Packing & delivery

Packed for Sea Freight

  • Flange faces capped to protect the raised face
  • Each valve bagged; the order packed in plywood cases
  • MTC (EN 10204 3.1) inside every case
  • Lead time 50–60 days, confirmed with your quote

FAQ

Frequently Asked Questions

Is the Q47F trunnion ball valve API 607 fire-safe certified?

Yes. Our soft-seated American-standard trunnion ball valves passed API 607 (8th Edition) fire testing witnessed by TÜV SÜD, which issued the certificates in October 2026. The certificate numbers and the sizes, classes and materials each one covers are listed on our About page.

When should I choose a trunnion ball valve instead of a floating ball valve?

Choose a trunnion ball valve for larger sizes and higher pressure classes. The ball sits on upper and lower trunnions, so line pressure is carried by the trunnions instead of being pushed into the downstream seat. Operating torque stays lower, the seats wear less, and a smaller gearbox or actuator is enough.

Which sizes and pressure classes do you make?

NPS 4″ to 24″ in Class 150 and Class 300, and NPS 2″ to 16″ in Class 600. Chinese-standard versions are made in PN16, PN25, PN40 and PN64. Body materials are WCB, CF8 and CF3M (316L).

What is the lead time?

The Q47F trunnion ball valve is made to order. Lead time is 50 to 60 days, and we confirm the delivery date with your quote.

Can the valve be fitted with a pneumatic or electric actuator?

Yes. The valve has an ISO 5211 top flange. Worm gear operation is standard, and we can supply and fit a pneumatic or electric actuator and test the complete package before shipment.

Which documents ship with the valve?

Every order ships with our Product Test Report to EN 10204 3.1: heat number, chemical composition, mechanical properties and API 598 shell and seat test results. Third-party inspection (e.g. SGS or BV) is welcome, arranged by the buyer.