Since 1994 · Wenzhou plant · Built to API 608 / ASME B16.34 · Europe office in Budapestsales@bautu.comWhatsApp +36 30 713 3633
Home / Ball Valves / Actuated Ball Valves / Pneumatic PTFE-Lined Ball Valve

Actuated lined ball valve · Chinese standard (GB) · Made in Wenzhou

Pneumatic PTFE-Lined Ball Valve — GB/T 12237, PN16, DN25–DN150

MODEL Q641F46-16C / P / RL · GB/T 12237 · PN16

Fluorine-lined ball valve with a pneumatic actuator mounted, piped and tested in our plant. Body, bonnet and ball are lined with F46 (FEP) and the seats are PTFE, so acids, alkalis and solvents never touch the metal. Supplied as a complete package with solenoid valve, limit switch box and filter regulator on request.

SizeDN25–DN150
RatingPN16
BodyWCB · CF8 · CF3M
LiningF46 (FEP)
ActuatorDouble / spring return
FlangesHG/T 20592 (GB)
  • Actuator sized to the valve torque, mounted and stroke-tested before shipment
  • Lining spark-tested for pinholes; shell and seat tested per GB/T 13927
  • Accessories: solenoid valve, limit switch box, filter regulator, explosion-proof options

An engineer replies within 24 hours. Send size, PN, material and quantity. Download GA drawing (PDF) →

Specifications

Technical Data

Design standardGB/T 12237
Face-to-faceGB/T 12221
FlangesHG/T 20592, raised face
Size rangeDN25–DN150
Pressure ratingPN16
Body materialWCB (A216) · CF8 (A351) · CF3M (A351)
LiningF46 (FEP) on body, bonnet and ball
Seat, gasket and packingPTFE
Temperature−29 °C to +120 °C
ConstructionTwo-piece body, floating ball
Actuator mountingISO 5211 pad, direct mount
ActuatorPneumatic rack-and-pinion, double-acting or single-acting (spring return)
Air supply0.4–0.7 MPa, clean dry air
Solenoid valveNAMUR, 24 V DC / 220 V AC; explosion-proof on request
Limit switch boxOpen / closed feedback; explosion-proof on request
ControlOn/off; positioner for modulating service on request
TestingGB/T 13927 — every valve; lining spark-tested

Application

Where It Is Used

For corrosive liquids and gases that would attack an unlined metal valve. Send us the media, concentration and temperature and we confirm that the F46 lining suits it.

  • Chemical process and transfer lines
  • Acid and alkali dosing
  • Water treatment chemicals
  • Automated on/off service via the ISO 5211 pad
Ball valve assembly hall at the BAUTU plant in WenzhouASSEMBLY HALL · WENZHOU

Construction

Parts & Materials

From our Q41F46-16 general assembly drawing. F46 = FEP fluoroplastic. Every body casting is marked with size, rating and material.

PartWCB bodyCF8 bodyCF3M body
Body / BonnetA216 WCB + F46 liningA351 CF8 + F46 liningA351 CF3M + F46 lining
BallSS304 + F46SS304 + F46SS316L + F46
SeatPTFEPTFEPTFE
GasketPTFEPTFEPTFE
Stem packingPTFEPTFEPTFE
GlandA216 WCBA351 CF8A351 CF3M
BracketA216 WCBA351 CF8A351 CF3M
Bolts / NutsA193 B7 / A194 2HA193 B8 / A194 8A193 B8 / A194 8
Locating block / SpringSS304SS304SS304
ActuatorAluminium alloy, anodisedAluminium alloy, anodisedAluminium alloy, anodised

Dimensions

Dimensions (mm)

PN16 — DN25 to DN150

DNNPSLDdGfTn-ØCISO 5211 padH2H1
251″140 / 15011585673.5164-Ø1411F05 / F071785
321¼″165140100763.5164-Ø1811F05 / F071893
401½″165 / 180150110873.5164-Ø1814F07 / F101899
502″2021651251014164-Ø1814F07 / F1020104
652½″2221851451204.5168-Ø1817F10 / F1220142
803″241 / 2502001601364.5188-Ø1817F10 / F1220154
1004″305 / 2802201801565188-Ø1819F10 / F1222184
1255″356 / 3202502101865208-Ø1827F12 / F1426220
1506″394 / 3602852402105208-Ø2236F12 / F1428240

From our Q41F46-16 general assembly drawing. L = face-to-face; where two values are given, both lengths are available (tell us which you need) · D = flange O.D. · d = bolt circle · G = raised face O.D. · f = raised face height · T = flange thickness · n-Ø = bolt holes · ISO 5211 pad = actuator flange sizes on the top pad · C, H1, H2: see the GA drawing. Flanges to HG/T 20592.

Face-to-face length of a ball valve checked with a caliperFACE-TO-FACE CHECK
Quality certificate tag on a BAUTU ball valveQC TAG ON EVERY VALVE

Checked before packing

Face-to-face and flange dimensions are checked with calipers against the drawing before packing, and the lining is spark-tested. Each valve gets a QC tag with model, size, rating and inspector.

Pressure rating

Pressure Rating

RatingNominal pressure (MPa)
PN161.6

Nominal pressure at room temperature. The lining sets the temperature limit: −29 °C to +120 °C.

Testing

Pressure Test on Every Valve

TestPressure
Shell test (water)2.4 MPa
Seat test (water)1.76 MPa
Seat test (air)0.6 MPa

Tested per GB/T 13927; the lining is spark-tested for pinholes. Actual values for each valve are on the test report.

How to order

Model Code Q641F46-16C

QBall valve
6Pneumatic actuator
4Flanged ends
1Floating ball, straight-through
F46FEP lining
16PN16
CBody material (C = WCB, P = CF8, RL = CF3M)

The model code is printed on the nameplate and the QC tag. We confirm the full code on the order confirmation.

Send us these 9 details for a fast quote

  1. Size (DN)
  2. Body material (WCB / CF8 / CF3M)
  3. Media and concentration
  4. Operating temperature and pressure
  5. Face-to-face length, if you need a specific one
  6. Actuator: double-acting or spring return, air supply pressure
  7. Accessories: solenoid voltage, limit switch, explosion-proof rating
  8. Quantity
  9. Destination port

Made in one plant

From Machining to Crate in Wenzhou

Machining a stainless steel ball valve body01 MACHINING
Drilling the flange bolt holes of a ball valve body02 DRILLING
Tightening body bolts during ball valve assembly03 ASSEMBLY
Ball valve clamped in the API 598 hydraulic test press04 PRESSURE TEST

See the valve before you order

Real footage of the valve from our plant. Want to see your own order? Book a live video call and we show your valves on the test bench.

Book a Video Tour
Export crates ready to ship in front of the BAUTU plant in WenzhouCRATED AT OUR PLANT

Packing & delivery

Packed for Sea Freight

  • Flange faces capped to protect the raised face
  • Each valve bagged; the order packed in plywood cases
  • MTC (EN 10204 3.1) inside every case
  • Standard sizes ship in 15–20 days

FAQ

Frequently Asked Questions

What is a pneumatic PTFE-lined ball valve?

A ball valve whose body, bonnet and ball are lined with F46 (FEP) fluoroplastic and fitted with PTFE seats, operated by a pneumatic actuator. The lining keeps corrosive media away from the metal; the actuator gives remote or automatic on/off control.

Which standard is the valve made to?

The lined ball valve is made to the Chinese standard GB/T 12237, with GB/T 12221 face-to-face and HG/T 20592 flanges, PN16, DN25 to DN150. Check that the flange drilling matches your piping before ordering.

Which actuator do you fit?

A pneumatic rack-and-pinion actuator, double-acting or single-acting (spring return), sized to the valve torque with a safety margin. We mount it on the ISO 5211 pad and stroke-test the complete package before shipment.

Can you supply the solenoid valve and limit switch box?

Yes. We supply a NAMUR solenoid valve (24 V DC or 220 V AC), a limit switch box for open/closed feedback and a filter regulator, with explosion-proof versions on request. A positioner can be fitted for modulating service.

Which media is it suitable for?

Acids, alkalis, salt solutions and organic solvents in chemical, pharmaceutical, electroplating and water treatment plants, from −29 °C to +120 °C. It is not intended for media with abrasive solids or for molten alkali metals and fluorine gas.

What is the lead time?

Standard sizes ship in 15–20 days. Special accessories or explosion-proof packages may take longer; we confirm the delivery date with your quote.