
Swing check valve · Japanese standard · Made in Wenzhou
JIS 10K Flanged Swing Check Valve — DN50 to DN350
Flanged swing check valve that opens with forward flow and closes on reverse flow, built to JIS B2074 with JIS B2002 face-to-face and JIS 10K flanges. DN50 to DN350, in CF8 (SCS13), CF3M (SCS16) or WCB (SCPH2), for pump discharge, water and process lines on plants built to Japanese standards.
- Bodies cast in our own foundry, traceable to the heat number
- Every valve shell and seat tested per JIS B2003, test report in every shipment
- Standard sizes ship in 15–20 days
An engineer replies within 24 hours. Send size, material and quantity.
Specifications
Technical Data
| Design | JIS B2074 (10K) |
| Type | Swing disc on a hinge arm, bolted cover |
| Face-to-face | JIS B2002 |
| Flanges | JIS B2212 10K, raised face |
| Size range | DN50–DN350 (2″–14″) |
| Rating | JIS 10K |
| Body material | CF8 (SCS13) · CF3M (SCS16) · WCB (SCPH2) |
| Seating | Metal-to-metal, seating faces machined on the body and disc |
| Installation | Horizontal lines, or vertical lines with upward flow |
| Testing | JIS B2003, shell and seat test on every valve |
Application
Where It Is Used
For horizontal lines, or vertical lines with upward flow, where reverse flow must be stopped automatically.
- Pump and compressor discharge lines
- Chemical lines with corrosive media (CF3M / SCS16 body)
- Water supply and treatment
- Plants and projects designed to JIS standards: Japan, Korea, Taiwan and Southeast Asia
ASSEMBLY HALL · WENZHOUConstruction
Parts & Materials
Same construction as our cast steel swing check valves; CF3M (SCS16) version shown. JIS equivalents: CF8 = SCS13, CF3M = SCS16, WCB = SCPH2. WCB and CF8 versions are built the same way with matching trim; we confirm the bill of materials with your quotation.
| Part | Material (CF3M / SCS16 valve) |
|---|---|
| Body | A351 CF3M |
| Body seat | 316L |
| Disc | A351 CF3M |
| Hinge arm | A351 CF3M |
| Hinge pin | 304 |
| Cover | A351 CF8 |
| Cover gasket | 304 + flexible graphite |
| Studs / nuts | 304 |
| Lifting eye | 304 |
Features
- Materials selected to Chinese and international standards
- Disc and seat sealing faces hard-faced with iron-based alloy or Stellite cobalt alloy: wear-, heat- and corrosion-resistant, long service life
- Flanges and flange facings to the standard your project uses
- Wide choice of body materials and gaskets matched to pressure, temperature and media
Dimensions
Dimensions (mm)
Face-to-face to JIS B2002, flanges to JIS B2212 10K. Unit: mm.
JIS 10K, DN50–DN350
| DN | NPS | L | D | D1 | D2 | b | n-Ød | H |
|---|---|---|---|---|---|---|---|---|
| 50 | 2″ | 203 | 155 | 120 | 100 | 16 | 4-Ø19 | 165 |
| 65 | 2½″ | 216 | 175 | 140 | 120 | 18 | 4-Ø19 | 175 |
| 80 | 3″ | 241 | 185 | 150 | 130 | 18 | 8-Ø19 | 190 |
| 100 | 4″ | 292 | 210 | 175 | 155 | 18 | 8-Ø19 | 215 |
| 150 | 6″ | 406 | 280 | 240 | 215 | 22 | 8-Ø23 | 265 |
| 200 | 8″ | 495 | 330 | 290 | 265 | 22 | 12-Ø23 | 320 |
| 250 | 10″ | 622 | 400 | 355 | 325 | 24 | 12-Ø25 | 365 |
| 300 | 12″ | 698 | 445 | 400 | 370 | 24 | 16-Ø25 | 415 |
| 350 | 14″ | 787 | 490 | 445 | 415 | 26 | 16-Ø25 | 460 |
L face-to-face · D flange outside diameter · D1 bolt circle diameter · D2 raised face diameter · b flange thickness · n-Ød number and diameter of bolt holes · H height.
Pressure rating
Pressure Rating
| Rating | Max. working pressure (steel, up to 120 °C) |
|---|---|
| JIS 10K | 1.4 MPa |
The allowed pressure falls as the temperature rises; we confirm the rating for your media and temperature on the quotation.
Testing
Pressure Test on Every Valve
| Test | Pressure |
|---|---|
| Shell test (water) | 1.5 × max. working pressure |
| Seat test (water) | 1.1 × max. working pressure |
Tested per JIS B2003. Actual values for each valve are on the test report.
HYDRAULIC TEST BENCH
SHELL & SEAT TESTQuality records
A Product Test Report in Every Shipment
- Heat number of the body casting
- Chemical composition against ASTM limits
- Mechanical properties: tensile, yield, elongation
- Shell and seat test pressure and hold time
- Signed and stamped by our QC department
We welcome third-party inspection (e.g. SGS or BV), arranged and paid for by the buyer; inspectors get full access to our plant and test bench.
Download Sample EN 10204 3.1 Report (PDF)How to order
Model Code H44W-10K
Order code by size, e.g. H44W-10K-DN100. We confirm the full code and body material on the order confirmation.
Send us these 7 details for a fast quote
- Size (DN50–DN350)
- Rating (JIS 10K)
- Body material (CF8 / CF3M / WCB)
- Media and temperature
- Quantity
- Marking or nameplate needs
- Destination port
Made by BAUTU
From Casting to Crate
01 CASTING
02 MACHINING
03 ASSEMBLY
04 PRESSURE TEST
FINISHED VALVESSee the valve before you order
Want to see your own order before it ships? Book a live video call and we show your valves on the test bench.
Book a Video Tour
BAGGED & CAPPEDPacking & delivery
Packed for Sea Freight
- Flange faces capped to protect the sealing face
- Each valve bagged; the order packed in plywood cases
- Product test report inside every case
- Standard sizes ship in 15–20 days
FAQ
Frequently Asked Questions
How should a swing check valve be installed?
In horizontal pipe, or in vertical pipe with the flow going up, with the arrow on the body pointing in the flow direction. Leave a straight run upstream, away from pump outlets and elbows, so the disc does not flutter.
Will a JIS 10K check valve fit ANSI or PN16 flanges?
No. JIS 10K flanges have their own outside diameter, bolt circle and bolt holes. Order the valve to match your pipe flanges. We also make swing check valves to API 594 (Class 150–600) and GB/T 12236.
Which body materials are available?
CF8 (JIS SCS13) and CF3M (JIS SCS16) stainless steel, and WCB (JIS SCPH2) carbon steel. The body is cast with the size, rating and material.
Do you make JIS 20K check valves?
Our standard JIS check valve is 10K, DN50 to DN350. Send us the size and quantity for 20K and we will confirm it on the quotation.
What is the lead time?
Standard sizes ship in 15–20 days. Large sizes and special trims are confirmed on the quotation.
Need a Quote for This Valve?
Send size, PN, body material and quantity. An engineer replies within 24 hours.




