
Metal-seated wedge gate valve · Japanese standard · Made in Wenzhou
JIS 10K / 20K Flanged Gate Valve — CF8 · CF3M · WCB
Cast steel wedge gate valve built to JIS B2073 (10K) and JIS B2083 (20K), with JIS B2002 face-to-face and JIS flanges. DN50 to DN500 in 10K, DN50 to DN450 in 20K, in CF8 (SCS13), CF3M (SCS16) or WCB (SCPH2), for water, oil, gas and chemical lines on plants built to Japanese standards.
- Body, bonnet and wedge cast in our own foundry
- Every valve shell and seat tested per JIS B2003, test report in every shipment
- Standard sizes ship in 15–20 days
An engineer replies within 24 hours. Send size, 10K or 20K, material and quantity.
Specifications
Technical Data
| Design | JIS B2073 (10K) · JIS B2083 (20K) |
| Type | Wedge gate valve, rising stem, bolted bonnet |
| Face-to-face | JIS B2002 |
| Flanges | JIS B2212 (10K) · JIS B2214 (20K), raised face |
| Size range | 10K: DN50–DN500 (2″–20″) · 20K: DN50–DN450 (2″–18″) |
| Rating | JIS 10K · JIS 20K |
| Body material | CF8 (SCS13) · CF3M (SCS16) · WCB (SCPH2) |
| Seating | Metal-to-metal, seating faces machined on the body and wedge; Stellite to order |
| Stem | A182 F304 / F316, rising |
| Operation | Handwheel; bevel gearbox for large sizes to order |
| Testing | JIS B2003, shell and seat test on every valve |
Application
Where It Is Used
For lines that run fully open or fully closed, where a full bore and low pressure drop matter.
- Water supply and treatment
- Oil and fuel lines
- Gas lines
- Chemical lines (CF3M / SCS16 body)
- Non-corrosive water, oil and gas lines (WCB body)
- Plants and projects designed to JIS standards: Japan, Korea, Taiwan and Southeast Asia
ASSEMBLY HALL · WENZHOUConstruction
Parts & Materials
Same construction as our cast steel gate valves. JIS equivalents: CF8 = SCS13, CF3M = SCS16, WCB = SCPH2. Stainless steel version shown; WCB carbon steel bodies are also available, with the trim confirmed on your quotation. Every body casting is marked with size, rating and material.
| Part | CF8 valve | CF3M valve |
|---|---|---|
| Body | A351 CF8 | A351 CF3M |
| Wedge | A351 CF8 | A351 CF3M |
| Bonnet | A351 CF8 | A351 CF3M |
| Stem | A182 F304 | A182 F316 |
| Stem nut | A182 F304 | A182 F316 |
| Bearing cover | A182 F304 | A182 F316 |
| Bonnet gasket | SS304 + graphite | SS316L + graphite |
| Stem packing | Braided graphite rings top and bottom, flexible graphite in between | Same |
| Gland | A351 CF8 | A351 CF3M |
| Gland eye bolts / nuts | A193 B8 / A194 8 | A193 B8 / A194 8 |
| Bonnet studs / nuts | A193 B8 / A194 8 | A193 B8 / A194 8 |
| Handwheel | QT400 ductile iron | QT400 ductile iron |
| Handwheel lock nut | A29 1025 | A29 1025 |
| Grease nipple | Brass | Brass |
Dimensions
Dimensions (mm)
Face-to-face to JIS B2002, flanges to JIS B2212 (10K) and JIS B2214 (20K). Unit: mm.
JIS 10K, DN50–DN500
| DN | NPS | L | H | D0 |
|---|---|---|---|---|
| 50 | 2″ | 178 | 409 | 200 |
| 65 | 2½″ | 190 | 535 | 250 |
| 80 | 3″ | 203 | 570 | 250 |
| 100 | 4″ | 229 | 590 | 250 |
| 150 | 6″ | 267 | 630 | 300 |
| 200 | 8″ | 292 | 960 | 350 |
| 250 | 10″ | 330 | 1158 | 400 |
| 300 | 12″ | 356 | 1378 | 450 |
| 350 | 14″ | 381 | 1543 | 500 |
| 400 | 16″ | 406 | 1738 | 600 |
| 450 | 18″ | 432 | 1959 | 600 |
| 500 | 20″ | 457 | 2214 | 680 |
JIS 20K, DN50–DN450
| DN | NPS | L | H | D0 |
|---|---|---|---|---|
| 50 | 2″ | 216 | 480 | 200 |
| 65 | 2½″ | 241 | 510 | 250 |
| 80 | 3″ | 283 | 580 | 280 |
| 100 | 4″ | 305 | 700 | 350 |
| 150 | 6″ | 403 | 940 | 400 |
| 200 | 8″ | 419 | 1190 | 450 |
| 250 | 10″ | 457 | 1390 | 500 |
| 300 | 12″ | 502 | 1600 | 500 |
| 350 | 14″ | 762 | 1750 | 600 |
| 400 | 16″ | 838 | 1900 | 600 |
| 450 | 18″ | 914 | 2320 | 650 |
L face-to-face · H height, valve open · D0 handwheel diameter. Flange dimensions follow the JIS flange standard for the rating.
Pressure rating
Pressure Rating
| Rating | Max. working pressure (steel, up to 120 °C) |
|---|---|
| JIS 10K | 1.4 MPa |
| JIS 20K | 3.4 MPa |
The allowed pressure falls as the temperature rises; we confirm the rating for your media and temperature on the quotation.
Testing
Pressure Test on Every Valve
| Test | Pressure |
|---|---|
| Shell test (water) | 1.5 × max. working pressure |
| Seat test (water) | 1.1 × max. working pressure |
Tested per JIS B2003. Actual values for each valve are on the test report.
HYDRAULIC TEST BENCHQuality records
A Product Test Report in Every Shipment
- Heat number of the body casting
- Chemical composition against ASTM limits
- Mechanical properties: tensile, yield, elongation
- Shell and seat test pressure and hold time
- Signed and stamped by our QC department
We welcome third-party inspection (e.g. SGS or BV), arranged and paid for by the buyer; inspectors get full access to our plant and test bench.
Download Sample EN 10204 3.1 Report (PDF)How to order
Model Code Z41W-10K
Order code by size, e.g. Z41W-10K-DN100. We confirm the full code and body material on the order confirmation.
Send us these 7 details for a fast quote
- Size (DN50–DN500)
- Rating (10K or 20K)
- Body material (CF8 / CF3M / WCB)
- Media and temperature
- Quantity
- Marking or nameplate needs
- Destination port
Made by BAUTU
From Casting to Crate
01 CASTING
02 MACHINING
03 ASSEMBLY
04 PRESSURE TESTSee the valve before you order
Real footage from our gate valve line. Want to see your own order? Book a live video call and we show your valves on the test bench.
Book a Video Tour
CRATED AT OUR PLANTPacking & delivery
Packed for Sea Freight
- Flange faces capped to protect the sealing face
- Each valve bagged; the order packed in plywood cases
- Product test report inside every case
- Standard sizes ship in 15–20 days
FAQ
Frequently Asked Questions
What is the difference between JIS 10K and 20K?
The rating sets the pressure and the flange. A steel JIS 10K valve is rated up to 1.4 MPa and a 20K valve up to 3.4 MPa at up to 120 °C. A 20K valve has a heavier body, a longer face-to-face and a larger flange, so 10K and 20K valves are not interchangeable in the line.
Will a JIS valve fit ANSI or PN16 flanges?
No. JIS flanges have their own outside diameter, bolt circle and bolt holes. Order the valve to match your pipe flanges. We also make the same gate valve to API 600 and GB/T 12234.
Which body materials are available?
CF8 (JIS SCS13) and CF3M (JIS SCS16) stainless steel, and WCB (JIS SCPH2) carbon steel. The body is cast with the size, rating and material.
Can I use a gate valve to regulate flow?
No. A gate valve runs fully open or fully closed. Half open, the flow wears the wedge and seats. For throttling, use a globe valve.
What is the lead time?
Standard sizes ship in 15–20 days. Large sizes and special trims are confirmed on the quotation.
Need a Quote for This Valve?
Send size, PN, body material and quantity. An engineer replies within 24 hours.




