Butterfly valve · Supplied by BAUTU
Stainless Steel Wafer Butterfly Valve — PTFE Seat, PN10/16
Centre-line (concentric) wafer butterfly valve with a CF8 stainless steel body and disc and a PTFE-lined seat. The body is cast for PN10/16, JIS 5K/10K and ASME Class 150 flanges, and the top flange takes our pneumatic or electric actuators. Supplied by BAUTU.
- One body fits PN10/16, JIS 5K/10K and ASME Class 150 flanges
- Top flange for direct actuator mounting
- Pressure tested at the factory; certificate of quality with every valve
An engineer replies within 24 hours. Send size, pressure, body material, actuator type and quantity.
Specifications
Technical Data
| Design | Centre-line (concentric) wafer type |
| Size range | DN40–DN250 (1½″–10″) |
| Nominal pressure | PN10 / PN16 (1.6 MPa) |
| Flange fit | PN10/16, JIS 5K/10K, ASME B16.5 Class 150 (cast on the body) |
| Body | CF8 (304); WCB or ductile iron (QT450) on request |
| Disc | CF8 (304); ductile iron on request |
| Stem | Stainless steel, 410 or 304 |
| Seat | PTFE-lined; EPDM or NBR on request |
| Stem sleeve | PTFE |
| O-ring | NBR |
| Temperature | Up to 150 °C with PTFE seat |
| Operation | Lever as standard; worm gear, pneumatic or electric actuator on request |
| Media | Water, chemicals, food liquids, air |
Application
Where It Is Used
For on-off and throttling service on low-pressure lines where a short, light valve is needed.
- Water treatment and dosing lines
- Chemical, acid and alkali transfer (PTFE seat)
- Food, beverage and brewery utility lines
- HVAC and cooling water
REAL PHOTO · PACKED FOR SHIPMENTDimensions
Dimensions (mm)
D1 · bolt circle · NרB · bolt holes · L · face-to-face · H · lever height above top flange · ØG · stem diameter · C · stem key width
D71F-16P, PN10/16 (DN40 uses the DN50 body)

| DN | D1 | NרB | L | H | ØG | C |
|---|---|---|---|---|---|---|
| DN50 | 125 | 4ר18 | 42 | 28 | 12.6 | 3 |
| DN65 | 145 | 4ר18 | 44.7 | 28 | 12.6 | 3 |
| DN80 | 160 | 4(8)ר18 | 45.2 | 28 | 12.6 | 3 |
| DN100 | 180 | 4(8)ר18 | 52.1 | 32 | 15.77 | 5 |
| DN125 | 210 | 4(8)ר18 | 54.4 | 32 | 18.92 | 5 |
| DN150 | 240 | 4(8)ר22 | 55.8 | 32 | 18.92 | 5 |
| DN200 | 295 | 4(8)ר22 | 60.6 | 42 | 22.1 | 5 |
| DN250 | 355 | 4(8)ר22 | 68 | 42 | 28.45 | 8 |
Real photos
Real Photos
CF8 BODY · PTFE SEAT · DN80
DN40/50 · PTFE SEAT
CAST: 5K · 10K · 150LB
CERTIFICATE OF QUALITYTesting
Pressure Tested Before Shipment
| Shell test | 1.5 × PN with water (2.4 MPa for PN16) |
| Seat test | 1.1 × PN with water (1.76 MPa for PN16), no visible leakage |
| Marking | Certificate of quality on every valve |
Actual test values are on the test report, available on request.
Quality records
Documents With Every Order
- Certificate of quality with every valve
- Pressure test report on request
- Material certificate on request
- Photos of your valves before shipment
- Certificate of origin on request
Third-party inspection (for example SGS or BV) is welcome; the buyer arranges and pays for it.
Options
Operators · Actuators · Accessories
- Hand lever with notch plate (standard)
- Worm gearbox with handwheel, on request
- Pneumatic actuator, double- or single-acting (BAUTU AT series)
- Electric actuator, on-off or 4–20 mA modulating, explosion-proof option
- Solenoid valve, limit switch box, positioner
- Actuators fitted to butterfly valves you already have
Actuators are fitted and set in our Wenzhou plant before shipment.
Send us these 7 details for a fast quote
- Valve size (DN) and flange standard
- Pressure: PN10, PN16 or Class 150
- Body, disc and seat material
- Operation: lever, gear, pneumatic or electric
- Media and temperature
- Actuator: air pressure or voltage, on-off or modulating
- Quantity and destination
How we supply it
Supplied and Automated by BAUTU
This butterfly valve is made by a partner factory that specialises in butterfly valves, and supplied by BAUTU. When you order it with an actuator, we fit and set the actuator in our Wenzhou plant.
- Valve made and pressure tested by our partner factory
- Certificate of quality with every valve
- Actuators fitted and set in our Wenzhou plant
- Photos of your order before shipment
FAQ
Frequently Asked Questions
Is this butterfly valve made in your own plant?
No. It is made by a partner factory that specialises in butterfly valves and supplied by BAUTU. Each valve is pressure tested and ships with a certificate of quality. When you order it with an actuator, we fit and set the actuator in our Wenzhou plant.
Which flanges does the wafer body fit?
The body is cast with PN10/16, 5K, 10K and 150LB, so one valve fits PN10/16, JIS 5K/10K and ASME Class 150 flanges.
PTFE seat or EPDM seat: which should I choose?
Choose the PTFE-lined seat for chemicals, acids, alkalis and food liquids, up to 150 °C. Choose EPDM for water, cooling water and HVAC; it costs less and needs less operating torque.
Can you automate this valve?
Yes. The top flange takes our pneumatic or electric actuators. We fit and set the actuator before shipment. We can also fit actuators to butterfly valves you bought elsewhere: send the valve model and top-flange size.
What is the lead time?
Standard sizes ship in 15–20 days. Large quantities and special materials are quoted per order.
What documents ship with the valve?
A certificate of quality with every valve. A pressure test report and material certificate are available on request. Third-party inspection (for example SGS or BV) is welcome; the buyer arranges and pays for it.
Need a Quote for This Valve?
Send size, flange standard, seat, operation and quantity. An engineer replies within 24 hours.




